Why Is Regular Lubrication Important for Paper Cup Machine?

Paper Cup Machine plays an irreplaceable role in the production of paper containers, and daily maintenance during the production process is particularly important. Let us learn about the daily maintenance methods of Paper Cup Machine from aspects such as cleaning, lubrication, replacement of wearing parts, circuit inspection, speed adjustment, daily records, etc., and hope it will be helpful to you.

So what are the precautions before starting the Paper Cup Machine? First, the employee who takes over the shift should collect the paper, cup bottom, carton, sealing glue, silicone oil and other materials required for the day before taking over, and check the materials collected and the number of remaining materials at work. If there is any problem, report it in time. Turn on the power button on the control panel to check whether the power supply of the machine is normal and whether the set temperature can reach the preset value.

Then add a little lubricating oil to the active parts of the Paper Cup Machine for lubrication, wipe the parts that the product needs to contact to avoid contamination, and check whether the connecting screws and top screws of the machine's operating parts are loose. Check the flatness of the paper, whether there is film peeling, spots, confusion between the front and back, wrinkles, etc. If necessary, spray the paper with an appropriate amount of water, and strictly control the water release time and humidity of the paper. Check the air pressure valve and adjust it to the required pressure value as required. Put on the bottom paper of the cup, paying attention to the front and back.

Cleaning measures are indispensable. Regularly cleaning the various parts of the Paper Cup Machine, especially the cleaning of the mold and cutter, plays a great role in ensuring product quality and extending the service life of the mold and cutter. At the same time, cleaning the circuit panel and electrical box can effectively reduce the aging of the circuit caused by the accumulation of dust and debris.

The most important lubrication step is here. The friction between the various parts of the Paper Cup Machine will cause wear, and the best way to reduce wear is to maintain adequate lubrication. In terms of lubrication, motor oil or lubricating oil is generally used for application. However, it should be noted that the lubricating oil should not be too much, otherwise it will cause the machine parts to be contaminated by oil and lose their use value.

In the daily maintenance of the Paper Cup Machine, replacing wearing parts is also a very important part. During use, some wearing parts will wear out as the number of uses increases. If they are not replaced in time, the performance of the equipment will decline, and serious equipment failures will occur. Therefore, when performing daily maintenance, it is necessary to check the status of wearing parts and replace them in time.

The circuit is an important part of the Paper Cup Machine, so it is necessary to check the circuit during daily maintenance. Check whether the wire interface is tight enough, whether the wire is damaged, and whether each switch and socket is effective. It should be checked at all times.

In daily use, the load capacity of the Paper Cup Machine is very important. If the production speed is too fast, it will bring certain pressure to the machine, and if the production speed is too slow, it will lead to insufficient number of finished products and affect the benefits. Therefore, it is necessary to adjust the production speed appropriately according to the use of the Paper Cup Machine to ensure the normal, effective and stable operation of the machine.

In the process of daily maintenance, it is necessary to record the work situation, including the content, time, personnel and other aspects of maintenance. In this way, the condition of the machine can be grasped in time, which is convenient for timely handling of problems and improving the efficiency of maintenance.